Bosch Oven 300 / 500 / 800 Series built-in wall ovens E107 Error Code

What the E107 code means

The cavity 1 door latch does not unlock on 300, 500 and 800 Series built-in wall ovens (E207 is the same fault for cavity 2) - the door may stay locked after self-clean or cooking.

Likely causes

  1. failed door latch motor or assembly → Shop the door latch assembly at RepairClinic
  2. latch jammed by heat distortion or debris
  3. latch switch or wiring fault

How to fix it — step by step

  1. Let the oven cool completely - the latch normally releases once the cavity is cool
  2. Turn the oven off at the breaker for 30 seconds and restore power to reset the latch
  3. Do not force the door; if it stays locked when cool, book a technician

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E107 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes

See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →