Sundance Spas Hot tub 880 Series ---- (Watchdog)
What this problem usually means
On Sundance Spas 880 Series hot tubs, ---- is the Watchdog display: the hot tub is deactivated because water temperature is above acceptable limits and a problem has been detected that could damage the hot tub or its components. Do not enter the water.
Likely causes
- extreme overheat
- failed temperature or high-limit sensor → Shop the temperature sensor at RepairClinic
- heater or control fault
How to fix it — step by step
- Do not enter the water
- Remove the hot tub cover to speed cooling
- Turn power off at the breaker
- Contact your Sundance Spas dealer or a qualified spa technician before using the spa again
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the temperature sensor.
Shop the temperature sensor at RepairClinic or Amazon
Also tied to this fault: high-limit sensor - Shop at RepairClinic or Amazon
Parts that commonly fix it
- temperature sensor - Shop at RepairClinic or Amazon
- high-limit sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.