Sundance Spas Hot tub 880 Series FLO2 Error Code
What the FLO2 code means
On Sundance Spas 880 Series hot tubs, FLO2 means the flow switch is malfunctioning - closed or shorted at system startup - and the system is disabled.
Likely causes
- flow switch stuck closed
- shorted flow switch
- flow switch wiring fault
How to fix it — step by step
- Turn power off at the breaker
- Do not use the spa while FLO2 is showing
- Contact your Sundance Spas dealer or a qualified spa technician to test and replace the flow switch → Shop the flow switch at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the flow switch.
Parts that commonly fix the FLO2 code
- flow switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.