Sundance Spas Hot tub 880 Series HOT Error Code
What the HOT code means
On Sundance Spas 880 Series hot tubs, HOT means the circuit board temperature has exceeded its acceptable limit. The message disappears when the board temperature drops back below the limit.
Likely causes
- equipment compartment overheating in hot sun
- poor ventilation around the equipment side
- direct sun on the equipment bay
How to fix it — step by step
- Leave the spa powered but do not open the equipment compartment near water
- Provide shade for the equipment side of the hot tub if the message persists
- Wait for the message to clear as the board cools
- Contact your Sundance Spas dealer if HOT appears repeatedly
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the HOT code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.