Sundance Spas Hot tub 880 Series SN3 Error Code
What the SN3 code means
On Sundance Spas 880 Series hot tubs, SN3 means the main temperature sensor is non-functional, open or shorted, and the heater is disabled. The manual states this must be repaired only by a Sundance Spas dealer or qualified service technician.
Likely causes
- open temperature sensor → Shop the temperature sensor at RepairClinic
- shorted temperature sensor
- damaged sensor wiring
How to fix it — step by step
- Turn power off at the breaker and leave the spa off
- Do not use the hot tub while SN3 is showing
- Contact your Sundance Spas dealer or a qualified spa technician for repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the temperature sensor.
Parts that commonly fix the SN3 code
- temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.