Sundance Spas Hot tub 880 Series COOL Error Code
What the COOL code means
On Sundance Spas 880 Series hot tubs, COOL is a freeze-protection status: if the water is more than about 19F (7C) cooler than the setpoint, Jets Pump 1 and the heater activate automatically to provide freeze protection until the water warms.
Likely causes
- water far below the set temperature
- recent refill with cold water
- cold weather
How to fix it — step by step
- No corrective action is required
- Leave the cover on while the spa warms up
- Keep power on to the spa
- Call a technician only if the spa never reaches temperature
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the COOL code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.