Sundance Spas Hot tub 880 Series FLO Error Code
What the FLO code means
On Sundance Spas 880 Series hot tubs, FLO means proper water flow is inhibited or the flow switch has malfunctioned. The heater is deactivated and the filter/circulation pump may also be deactivated. It can also appear if the pump has not regained prime after a drain and refill.
Likely causes
- clogged filter cartridge
- low water level
- air lock or pump not primed after refill
- malfunctioning flow switch → Shop the flow switch at RepairClinic
How to fix it — step by step
- Check the water level and top up if low
- Turn power off at the breaker and remove and clean the filter cartridge → Shop the filter cartridge at RepairClinic
- Restore power and let the circulation pump re-prime
- If FLO persists, contact your Sundance Spas dealer or a qualified spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the flow switch.
Shop the flow switch at RepairClinic or Amazon
Also tied to this fault: filter cartridge - Shop at RepairClinic or Amazon
Parts that commonly fix the FLO code
- flow switch - Shop at RepairClinic or Amazon
- filter cartridge - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.