Sundance Spas Hot tub 880 Series OH Error Code
What the OH code means
On Sundance Spas 880 Series hot tubs, OH is overheat protection: water temperature is above acceptable limits (a sensor has detected about 112F / 44C), the heater is deactivated and the circulation pump is activated. Do not enter the water.
Likely causes
- water overheated above the safe limit
- hot weather plus a high set point
- faulty temperature sensor → Shop the temperature sensor at RepairClinic
- restricted flow
How to fix it — step by step
- Do not enter the water - risk of hyperthermia
- Remove the hot tub cover to speed cooling
- Check the water temperature with a separate thermometer before reuse
- Turn power off and contact your Sundance Spas dealer or a qualified spa technician if the condition persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the temperature sensor.
Parts that commonly fix the OH code
- temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.