Sundance Spas Hot tub 880 Series ICE Error Code
What the ICE code means
On Sundance Spas 880 Series hot tubs, ICE means freeze protection has detected a potential freeze condition. No action is required; the jets pumps operate until the hot tub is out of danger. It commonly appears on first fill because tap water is very cold.
Likely causes
- water temperature near freezing
- cold tap water on first fill
- power restored in cold weather
How to fix it — step by step
- No action is required
- Keep power on so freeze protection can run the pumps
- Keep the cover on to retain heat
- Call a technician if ICE shows in warm weather
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the ICE code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.