Sundance Spas Hot tub 880 Series PNL Error Code
What the PNL code means
On Sundance Spas 880 Series hot tubs, PNL means communication between the control panel (and/or remote panel) and the circuit board is faulty.
Likely causes
- loose panel cable connection
- damaged panel cable
- faulty control panel or circuit board → Shop the control panel at RepairClinic
How to fix it — step by step
- Turn power off at the breaker for a few minutes, then restore it once to reset communications
- Do not open the equipment compartment yourself
- If PNL returns, contact your Sundance Spas dealer or a qualified spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the control panel.
Parts that commonly fix the PNL code
- control panel - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.