Sundance Spas Hot tub Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 20 codes covered.
Shop Sundance Spas Hot tub parts at RepairClinic
- ---- (Watchdog) — On Sundance Spas 880 Series hot tubs, ---- is the Watchdog display: the hot tub is deactivated because water temperature is above…
- BLB — On Sundance Spas 880 Series hot tubs, a flashing blb message means the CLEARRAY UV bulb timer has expired (365 days): the UV bulb needs…
- COOL — On Sundance Spas 880 Series hot tubs, COOL is a freeze-protection status: if the water is more than about 19F (7C) cooler than the…
- FL--1 — On Sundance Spas 780 Series hot tubs, FL--1 (FLOW ERROR OPEN) means the flow switch is malfunctioning open, the filter cartridge is…
- FL--2 — On Sundance Spas 780 Series hot tubs, FL--2 (FLOW ERROR CLOSED) means the flow switch is malfunctioning closed. The heater deactivates and…
- FL--3 — On Sundance Spas 780 Series hot tubs, FL--3 (FLOW ERROR TOGGLE) means the flow switch is behaving erratically. The heater deactivates and…
- FLO — On Sundance Spas 880 Series hot tubs, FLO means proper water flow is inhibited or the flow switch has malfunctioned. The heater is…
- FLO2 — On Sundance Spas 880 Series hot tubs, FLO2 means the flow switch is malfunctioning - closed or shorted at system startup - and the system…
- H--OH — On Sundance Spas 780 Series hot tubs, H--OH means the high-limit temperature is above acceptable limits, reaching 112F (44C). Do not enter…
- HOT — On Sundance Spas 880 Series hot tubs, HOT means the circuit board temperature has exceeded its acceptable limit. The message disappears…
- ICE — On Sundance Spas 880 Series hot tubs, ICE means freeze protection has detected a potential freeze condition. No action is required; the…
- ICE2 — On Sundance Spas 880 Series hot tubs, ICE2 indicates the flow switch is malfunctioning (closed or shorted at startup, like FLO2) and the…
- OH — On Sundance Spas 880 Series hot tubs, OH is overheat protection: water temperature is above acceptable limits (a sensor has detected about…
- PF — On Sundance Spas 880 Series hot tubs, PF means a power failure condition: fluctuation in the secondary power line is causing the DC voltage…
- PNL — On Sundance Spas 880 Series hot tubs, PNL means communication between the control panel (and/or remote panel) and the circuit board is…
- SN--1 — On Sundance Spas 780 Series hot tubs, SN--1 means the high-limit temperature sensor is not functioning - an open sensor disables the heater…
- SN--2 — On Sundance Spas 780 Series hot tubs, SN--2 means the main temperature sensor is not functioning, open or shorted, and the heater is…
- SN1 — On Sundance Spas 880 Series hot tubs, SN1 means the high-limit temperature sensor is non-functional - an open sensor disables the heater…
- SN3 — On Sundance Spas 880 Series hot tubs, SN3 means the main temperature sensor is non-functional, open or shorted, and the heater is disabled.…
- T--OH — On Sundance Spas 780 Series hot tubs, T--OH means the spa water temperature is above acceptable limits, reaching 112F (44C). Do not enter…