Sundance Spas Hot tub 880 Series PF Error Code
What the PF code means
On Sundance Spas 880 Series hot tubs, PF means a power failure condition: fluctuation in the secondary power line is causing the DC voltage to be low. The manual notes the PF error does not occur on the Maxxus model due to different software.
Likely causes
- power fluctuation or brownout
- low DC voltage from the secondary power line
- loose power connection
How to fix it — step by step
- Try resetting power to the spa at the breaker/GFCI
- Check that the GFCI has not tripped
- If PF returns, turn power off and contact your Sundance Spas dealer or a qualified spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the PF code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.