Polaris Pool cleaner Error 7

What this problem usually means

Control-box display error 7: cleaner floating — the cleaner is floating instead of staying on the pool surface/floor.

Likely causes

  1. Air trapped inside the cleaner housing
  2. Filter canister full or dirty

How to fix it — step by step

  1. Thoroughly clean the filter canister
  2. Turn off the cleaner and submerge it; shake it to release the air bubbles
  3. Restart the cycle
  4. If this does not resolve the problem, contact your local retailer for a diagnostic review or call customer service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Polaris Pool cleaner problems

See all Polaris pool cleaner codes & guides →