Polaris Pool cleaner 2 flashes

What it should look like on your machine

then it repeats

2 flashes - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

Status indicator flashing 2 flashes / 1 second pause: traction motor fault — right traction motor, left traction motor, or traction motor consumption (overcurrent) on either side.

Likely causes

  1. Debris or the cable preventing the brushes or the tracks from rotating freely
  2. Something interfering with the cable connection area

How to fix it — step by step

  1. Check that debris or the cable is not preventing the brushes or the tracks from rotating freely
  2. Check that nothing is interfering with the cable connection area
  3. Rotate the track by a quarter of a turn in the same direction until it rotates smoothly
  4. After fixing, press any key on the control box (except the power button) to delete the error code, or press Clear Error in the iAquaLink app
  5. If this does not resolve the problem, contact your local retailer for a diagnostic review or call customer service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Polaris Pool cleaner problems

See all Polaris pool cleaner codes & guides →