Polaris Pool cleaner 5 flashes

What it should look like on your machine

then it repeats

5 flashes - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

Status indicator flashing 5 flashes / 1 second pause (iAquaLink control models only): software update failed or incomplete.

Likely causes

  1. A software update to the control box failed or did not complete

How to fix it — step by step

  1. Disconnect and reconnect the control box to restart the update
  2. If this does not resolve the problem, contact your local retailer for a diagnostic review or call customer service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Polaris Pool cleaner problems

See all Polaris pool cleaner codes & guides →