Lennox Furnace Residential Communicating Systems alert codes — EL296/SL280/SLP98/ML296 and similar E201 Error Code
What the E201 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E201 means an indoor blower motor fault — the control lost communication with the blower motor, so there is no safe airflow for heating.
Likely causes
- Blower motor lost power → Shop the blower motor at RepairClinic
- Loose wiring between the control board and blower motor → Shop the control board at RepairClinic
- Failed variable-speed blower motor
- Power outage or brownout glitch
How to fix it — step by step
- Turn furnace power off for 60 seconds and back on once — communication sometimes recovers after an outage
- Confirm the breaker is on and the blower door is fully seated
- If E201 returns, call a technician to test the motor power and communication harness
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the blower motor.
Shop the blower motor at RepairClinic or Amazon
Also tied to this fault: control board - Shop at RepairClinic or Amazon
Parts that commonly fix the E201 code
- blower motor - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.