Goodman Air Conditioner EE Error Code
What the EE code means
Board mis-operation, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The air conditioner/heat pump fails to operate; Goodman lists compressor relay contacts welded as the cause and directs replacing the control.
Likely causes
- Compressor relay contacts welded on the outdoor control board
- Internal outdoor control board fault
How to fix it — step by step
- Turn power OFF to the outdoor unit before repair
- Have a technician confirm the welded relay / board fault
- Replace the outdoor control with the correct replacement part
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Outdoor unit integrated control board.
Shop the Outdoor unit integrated control board at RepairClinic or Amazon
Parts that commonly fix the EE code
- Outdoor unit integrated control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.