Goodman Air Conditioner d0 Error Code

What the d0 code means

Data not on network, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet communicating air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The unit is wired as part of a communicating system but the integrated control contains no shared data, so the air conditioner/heat pump fails to operate.

Likely causes

  1. Communicating system installed but shared data never populated
  2. Wrong system type configuration (communicating vs legacy)

How to fix it — step by step

  1. Verify the system type (communicating or legacy)
  2. Have a technician populate the shared data using the memory card for the specific model — inserted before power is turned ON — or wire the system as a legacy system
  3. The error clears once correct data is loaded

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the d0 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Goodman Air Conditioner error codes

See all Goodman Air Conditioner codes & guides →