Trane Furnace S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 E7.1 Error Code

What the E7.1 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E7.1 means the first-stage gas valve is energized when it should be off — a gas valve circuit fault.

Likely causes

  1. Control board gas valve relay stuck closed → Shop the control board at RepairClinic
  2. Shorted gas valve wiring
  3. Failed gas valve

How to fix it — step by step

  1. Turn furnace power off and close the gas shutoff to the furnace
  2. If you smell gas, leave and call the gas utility
  3. Do not attempt to run the furnace
  4. Call a technician immediately to test the gas valve circuit → Shop the gas valve at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E7.1 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Trane manual is on Trane's support site — you'll need your model number.

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Trane Furnace S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 error codes

See all Trane S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 codes & guides →