Trane Furnace S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 E04 Error Code

What the E04 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E04 means an open limit — the main thermal limit, a flame rollout switch, or the reverse airflow switch has opened, usually from overheating. On S8V2 models this fault is split into E4.0, E4.1 and E4.2 instead.

Likely causes

  1. Dirty air filter restricting airflow
  2. Closed registers or blocked returns
  3. Failing blower motor → Shop the blower motor at RepairClinic
  4. Tripped rollout switch → Shop the rollout switch at RepairClinic

How to fix it — step by step

  1. Turn the thermostat down and let the furnace cool
  2. Replace the air filter and open all supply registers
  3. Make sure returns are not blocked
  4. Restore the heat call once; if E04 returns, call a technician — a rollout trip needs a cause found before reset

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E04 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Trane manual is on Trane's support site — you'll need your model number.

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Trane Furnace S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 error codes

See all Trane S-series seven-segment display — S9X1/S9X2/S9B1/S8X1/S8X2 codes & guides →