Rheem Furnace Seven-segment display — R95P platform 33 Error Code
What the 33 code means
Manual reset limit control (MRLC), also called the rollout switch, is open on Rheem furnaces with the 7-segment diagnostic display. This is a safety trip — do not simply reset it.
Likely causes
- flame rollout from the burners
- blocked vent or flue
- cracked heat exchanger → Shop the heat exchanger at RepairClinic
- overheating at the burner compartment
How to fix it — step by step
- Turn the furnace off at the power switch
- Do not reset the rollout switch yourself → Shop the rollout switch at RepairClinic
- If anyone has headache or nausea or a CO alarm sounds, leave the building and call from outside
- Call a licensed HVAC technician to find why the switch tripped
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the rollout switch.
Shop the rollout switch at RepairClinic or Amazon
Also tied to this fault: heat exchanger - Shop at RepairClinic or Amazon
Parts that commonly fix the 33 code
- rollout switch - Shop at RepairClinic or Amazon
- heat exchanger - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.
Related Rheem Furnace Seven-segment display — R95P platform error codes
See all Rheem Seven-segment display — R95P platform codes & guides →