Rheem Furnace Seven-segment display — R95P platform 58 Error Code
What the 58 code means
Water sense circuit open on Rheem R95P furnaces with the 7-segment diagnostic display. The water level sensing circuit for the condensate system is open.
Likely causes
- disconnected water sensor wiring
- failed water level sensor → Shop the water level sensor at RepairClinic
- condensate system fault
How to fix it — step by step
- Check the condensate drain line and trap for clogs and clear any visible blockage
- Make sure the condensate pump, if fitted, is powered and working
- Turn power off for 30 seconds, then back on, and try one heat call
- Call a technician if the code returns — sensor wiring is pro work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the water level sensor.
Parts that commonly fix the 58 code
- water level sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.
Related Rheem Furnace Seven-segment display — R95P platform error codes
See all Rheem Seven-segment display — R95P platform codes & guides →