Rheem Furnace Seven-segment display — R95P platform 59 Error Code
What the 59 code means
Water sensed (blocked drain) on Rheem furnaces with the 7-segment diagnostic display. The water level sensor detected condensate backing up, and heating is shut down; repeated events cause a one-hour lockout with code 10.
Likely causes
- clogged condensate drain or trap
- failed condensate pump
- frozen condensate line
- kinked drain hose
How to fix it — step by step
- Check the condensate drain line for clogs, kinks or frozen sections and clear what you can reach safely
- Make sure the condensate pump, if fitted, is powered and emptying → Shop the condensate pump at RepairClinic
- Turn power off for 30 seconds, then back on, and try one heat call
- If water keeps backing up, stop and call a technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the condensate pump.
Parts that commonly fix the 59 code
- condensate pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.
Related Rheem Furnace Seven-segment display — R95P platform error codes
See all Rheem Seven-segment display — R95P platform codes & guides →