Lennox Furnace G61MPV — SureLight single-LED paired-flash (X + Y) 4 + 8 Error Code

What the 4 + 8 code means

On Lennox G61MPV furnaces with the SureLight control, flash code 4 + 8 means low line voltage — the supply voltage to the furnace is below the control's operating range.

Likely causes

  1. Low utility supply voltage or brownout
  2. Loose electrical connection at the furnace or panel
  3. Overloaded circuit

How to fix it — step by step

  1. Check whether lights dim or other appliances misbehave at the same time
  2. Confirm the furnace breaker is fully on
  3. Do not open the electrical panel or furnace junction yourself
  4. Call an electrician or HVAC technician if voltage stays low

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the 4 + 8 code

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Lennox Furnace G61MPV — SureLight single-LED paired-flash (X + Y) error codes

See all Lennox G61MPV — SureLight single-LED paired-flash (X + Y) codes & guides →