Lennox Air Conditioner 404 Error Code
What the 404 code means
Compressor rotor locked up (critical alert), reported by the outdoor unit and shown on the iComfort Wi-Fi / S-series communicating thermostat on Lennox communicating air conditioners (e.g. SL18XC). Lennox lists a short-circuited run capacitor, seized bearings or excessive liquid refrigerant as causes; the error clears after 4 consecutive normal run cycles or a power reset, and a hard start kit may be needed.
Likely causes
- Short-circuited / failed run capacitor
- Seized compressor bearings
- Excessive liquid refrigerant slugging the compressor
How to fix it — step by step
- Turn the system off — repeated start attempts can damage the compressor → Shop the compressor at RepairClinic
- Have a technician test the run capacitor and compressor windings → Shop the run capacitor at RepairClinic
- Replace the capacitor if failed; a seized compressor must be replaced by a technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Compressor.
Shop the Compressor at RepairClinic or Amazon
Also tied to this fault: Run capacitor - Shop at RepairClinic or Amazon; Hard start kit - Shop at RepairClinic or Amazon
Parts that commonly fix the 404 code
- Compressor - Shop at RepairClinic or Amazon
- Run capacitor - Shop at RepairClinic or Amazon
- Hard start kit - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.