Lennox Air Conditioner 405 Error Code
What the 405 code means
Compressor circuit open (critical alert), reported by the outdoor unit and shown on the iComfort Wi-Fi / S-series communicating thermostat on Lennox communicating air conditioners (e.g. SL18XC). The compressor circuit is open, for example from a power disconnection or an open fuse; the error clears after 1 normal compressor run cycle.
Likely causes
- Outdoor power disconnect open
- Open fuse or tripped breaker feeding the compressor
- Broken wire or loose connector in the compressor circuit
- Open compressor internal overload / winding
How to fix it — step by step
- Check the outdoor disconnect and the unit's breaker/fuses
- If power is present, have a technician trace the compressor circuit for an open wire, connector or winding → Shop the compressor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Compressor.
Shop the Compressor at RepairClinic or Amazon
Also tied to this fault: Compressor contactor - Shop at RepairClinic or Amazon
Parts that commonly fix the 405 code
- Compressor - Shop at RepairClinic or Amazon
- Compressor contactor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.