Lennox Air Conditioner 415 Error Code
What the 415 code means
Discharge line temperature lockout, reported by the outdoor unit control (DS15/DS13 compressor LED codes) and as alert code 415 on the iComfort Touch thermostat on Lennox XC21-series air conditioners (Unit Information, Table 10). Repeated or sustained excessive discharge line temperature has locked out the compressor.
Likely causes
- Repeated discharge temperature faults (see code 414)
- Unrepaired low charge, restriction or high head pressure condition
How to fix it — step by step
- Keep the system off until serviced — running with excessive discharge temperature damages the compressor → Shop the compressor at RepairClinic
- Have a technician correct the charge/pressure cause and reset the lockout
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Discharge line temperature sensor.
Shop the Discharge line temperature sensor at RepairClinic or Amazon
Also tied to this fault: Compressor - Shop at RepairClinic or Amazon
Parts that commonly fix the 415 code
- Discharge line temperature sensor - Shop at RepairClinic or Amazon
- Compressor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.