Lennox Air Conditioner 412 Error Code
What the 412 code means
Open high pressure switch (moderate alert), reported by the outdoor unit and shown on the iComfort Wi-Fi communicating thermostat on Lennox communicating air conditioners. The outdoor unit pressure is above the required limit and the system shuts down; per Lennox the high pressure switch opens at 590 psig and closes at 418 psig.
Likely causes
- Dirty or blocked outdoor coil
- Outdoor fan not running
- Refrigerant overcharge
- Failed high pressure switch
How to fix it — step by step
- Turn the system off and clean the outdoor coil
- Confirm the outdoor fan runs on a cooling call
- Have a technician check refrigerant pressures and the high pressure switch if the alert returns → Shop the high pressure switch at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the High pressure switch.
Shop the High pressure switch at RepairClinic or Amazon
Also tied to this fault: Outdoor fan motor - Shop at RepairClinic or Amazon
Parts that commonly fix the 412 code
- High pressure switch - Shop at RepairClinic or Amazon
- Outdoor fan motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.