Kenmore Washer 796 Series (LG-Built) Front-Load UE Error Code
What the UE code means
Unbalanced load on Kenmore 796-series (LG-built) front-load washers: the load could not be balanced for spin. On 796 top-load models the related uE code appears while the washer is still trying to rebalance.
Likely causes
- Load bunched to one side
- Single heavy item or a load that is too small
- Washer not level or suspension problem if it recurs with even loads
How to fix it — step by step
- Pause the cycle and redistribute the load evenly in the drum
- Add one or two similar items to a very small load
- Restart the cycle
- Check the washer is level if UE returns with balanced loads
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the UE code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Kenmore Washer 796 Series (LG-Built) Front-Load error codes
See all Kenmore 796 Series (LG-Built) Front-Load codes & guides →