Kenmore Washer 796 Series (LG-Built) Front-Load dE Error Code
What the dE code means
Door open error on Kenmore 796-series (LG-built) front-load washers: the control thinks the door is open, so the cycle will not run.
Likely causes
- Door not closed firmly
- Clothing caught between the door and the seal
- Damaged door latch or lock
How to fix it — step by step
- Open the door, check nothing is trapped in the seal, and close it firmly
- Check the door latch area for damage or debris
- Restart the cycle
- Replace the door lock if dE returns with the door closing properly → Shop the door lock at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door lock.
Parts that commonly fix the dE code
- door lock - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Kenmore Washer 796 Series (LG-Built) Front-Load error codes
See all Kenmore 796 Series (LG-Built) Front-Load codes & guides →