Kenmore Washer 796 Series (LG-Built) Front-Load LE Error Code

What the LE code means

Locked drive motor error on Kenmore 796-series (LG-built) front-load washers: the motor cannot turn the drum. On 796 top-load models LE can instead mean the motor thermal overload tripped, so check your series.

Likely causes

  1. Drum overloaded or an item jammed between drum and tub
  2. Failed rotor or stator / motor fault
  3. Motor wiring or control fault

How to fix it — step by step

  1. Remove some items if the drum was overloaded and try to turn the drum by hand
  2. Check for a trapped item if the drum will not turn freely
  3. Unplug for a few minutes and restart the cycle
  4. Call a technician if LE returns, as the drive motor needs service → Shop the drive motor at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the LE code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Kenmore Washer 796 Series (LG-Built) Front-Load error codes

See all Kenmore 796 Series (LG-Built) Front-Load codes & guides →