Kenmore Washer 796 Series (LG-Built) Front-Load PF Error Code

What the PF code means

Power failure on Kenmore 796-series (LG-built) front-load washers: power was lost during the cycle, so the cycle may not have completed properly.

Likely causes

  1. House power outage
  2. Tripped breaker or blown fuse
  3. Loose power cord connection

How to fix it — step by step

  1. Check the breaker and that the power cord is firmly plugged in
  2. Wait for stable power if an outage just ended
  3. Start a new cycle, as the interrupted cycle may not finish correctly

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the PF code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Kenmore Washer 796 Series (LG-Built) Front-Load error codes

See all Kenmore 796 Series (LG-Built) Front-Load codes & guides →