Kenmore 796 Series (LG-Built) Front-Load Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 10 codes covered.
Shop Kenmore 796 Series (LG-Built) Front-Load parts at RepairClinic or Amazon
- dE — Door open error on Kenmore 796-series (LG-built) front-load washers: the control thinks the door is open, so the cycle will not run.
- EE — EEPROM error on the main electronic control board on Kenmore 796-series (LG-built) front-load washers: the control board memory is…
- FE — Water overflow error on Kenmore 796-series (LG-built) front-load washers: the water level is too high.
- IE — Inlet water supply error on Kenmore 796-series (LG-built) front-load washers: the expected water level is not reached in 8 minutes, or the…
- LE — Locked drive motor error on Kenmore 796-series (LG-built) front-load washers: the motor cannot turn the drum. On 796 top-load models LE can…
- OE — Slow drain on Kenmore 796-series (LG-built) front-load washers: the washer is not draining, or is draining too slowly.
- PE — Water level sensor failure on Kenmore 796-series (LG-built) front-load washers: the control cannot read the water level correctly.
- PF — Power failure on Kenmore 796-series (LG-built) front-load washers: power was lost during the cycle, so the cycle may not have completed…
- tE — Heating sensor (thermistor) error on Kenmore 796-series (LG-built) front-load washers: the water temperature sensor reading is out of range.
- UE — Unbalanced load on Kenmore 796-series (LG-built) front-load washers: the load could not be balanced for spin. On 796 top-load models the…