iRobot Robot vacuum Roomba 400 Series Uh-oh + 3 beeps
What it should sound like on your machine
then it repeats
3 beeps - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
Roomba plays 'uh-oh' then 3 beeps: the vacuum (blower) motor is stalled.
Likely causes
- Debris jammed in the blower impeller
- A failed vacuum blower motor → Shop the vacuum blower motor at Amazon
- A clogged filter or bin restricting airflow
How to fix it — step by step
- Remove the bin and check the blower impeller spins freely
- Clean or replace the filter and empty the bin
- If the impeller is free but the blower does not run, replace the blower motor
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Vacuum blower motor.
Parts that commonly fix it
- Vacuum blower motor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: documented owner repair reports. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.