iRobot Robot vacuum Roomba 400 Series Uh-oh + 2 beeps
What it should sound like on your machine
then it repeats
2 beeps - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
Roomba plays 'uh-oh' then 2 beeps: the side brush is stalled.
Likely causes
- Debris wound under the side brush
- A stripped side brush gearbox or failed side brush motor
How to fix it — step by step
- Remove the side brush screw and brush and clear debris from the shaft
- Spin the side brush shaft by hand; grinding or no resistance suggests gearbox damage
- Replace the side brush module if the motor does not run → Shop the side brush module at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Side brush module.
Parts that commonly fix it
- Side brush module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: documented owner repair reports. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.