Goodman Air Conditioner A3 Error Code

What the A3 code means

Outdoor coil temperature sensor fault, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The sensor is shorted, open, disconnected or out of range; on a heat pump the symptom noted by Goodman is failure to operate in heating mode.

Likely causes

  1. Shorted outdoor coil temperature sensor → Shop the outdoor coil temperature sensor at RepairClinic
  2. Open or disconnected sensor
  3. Sensor out of range

How to fix it — step by step

  1. Turn power OFF to the outdoor unit before repair
  2. Check the sensor connection and its mounting on the outdoor coil
  3. Replace the open/shorted sensor with the correct replacement part

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the A3 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Goodman Air Conditioner error codes

See all Goodman Air Conditioner codes & guides →