Whirlpool Washer Front-Load (Tech Sheet W11156990) F0 E5 Error Code
What the F0 E5 code means
Off-balance load: the load is unbalanced or too large for the washer to spin safely.
Likely causes
- Load packed tightly or unevenly around the basket
- Washing a single heavy item alone
- Load too large
How to fix it — step by step
- Pause and redistribute items evenly around the basket
- Remove some items if the load is too large
- Avoid washing a single item alone; add towels to balance it
- Close the lid/door and press Start to resume
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the F0 E5 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Whirlpool Washer Front-Load (Tech Sheet W11156990) error codes
See all Whirlpool Front-Load (Tech Sheet W11156990) codes & guides →