Whirlpool Washer Front-Load (Tech Sheet W11156990) F4 E1 Error Code
What the F4 E1 code means
Wash heater relay error: the control cannot detect the expected temperature rise from the wash heater.
Likely causes
- Failed wash heating element → Shop the wash heating element at RepairClinic
- Heater relay fault on the main control
- Loose heater wiring
How to fix it — step by step
- Unplug the washer for 5 minutes and restart a heated cycle
- If the code returns, call for service to test the heater and control
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the wash heating element.
Shop the wash heating element at RepairClinic or Amazon
Also tied to this fault: main control board - Shop at RepairClinic or Amazon
Parts that commonly fix the F4 E1 code
- wash heating element - Shop at RepairClinic or Amazon
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Whirlpool Washer Front-Load (Tech Sheet W11156990) error codes
See all Whirlpool Front-Load (Tech Sheet W11156990) codes & guides →