Whirlpool Washer Front-Load (Tech Sheet W11156990) F0 E2 Error Code

What the F0 E2 code means

Oversuds: the washer detected excessive suds and is running a suds-reduction routine.

Likely causes

  1. Too much detergent used
  2. Non-HE detergent used in an HE washer
  3. Restricted drain hose or standpipe raising suds level

How to fix it — step by step

  1. Use only HE detergent and reduce the amount
  2. Let the washer finish its automatic rinse/suds routine
  3. Check the drain hose is not kinked or clogged
  4. Run a rinse cycle with no detergent if suds remain

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F0 E2 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Whirlpool Washer Front-Load (Tech Sheet W11156990) error codes

See all Whirlpool Front-Load (Tech Sheet W11156990) codes & guides →