Pentair Pool heater UltraTemp LOW WATER TEMP Error Code
What the LOW WATER TEMP code means
On Pentair UltraTemp heat pump pool heaters, LOW WATER TEMP means the water temperature is below 40F.
Likely causes
- pool water genuinely below 40F in cold weather
- failed water temperature thermistor reading low → Shop the thermistor at RepairClinic
- sensor wiring fault
How to fix it — step by step
- Check the actual water temperature with a separate thermometer
- Keep the pump circulating during freezing weather to protect plumbing
- If the water is well above 40F, the sensor reading is likely wrong
- Call a pool/spa technician if the alarm persists in mild conditions
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the temperature sensor.
Shop the temperature sensor at RepairClinic or Amazon
Also tied to this fault: thermistor - Shop at RepairClinic or Amazon
Parts that commonly fix the LOW WATER TEMP code
- temperature sensor - Shop at RepairClinic or Amazon
- thermistor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.