Pentair Pool heater UltraTemp BROWNOUT Error Code
What the BROWNOUT code means
On Pentair UltraTemp heat pump pool heaters, BROWNOUT means the 24 VAC supply voltage to the control board is low; the manual lists a bad transformer or insufficient supply voltage and warns to use extreme caution or call for advice before troubleshooting the electrical box.
Likely causes
- bad transformer
- insufficient supply voltage to the heat pump
- loose electrical connection
How to fix it — step by step
- Turn the heat pump off at the breaker
- Do not open the electrical box - the manual specifically warns about high voltage checks here
- Note if lights or other equipment also dim, suggesting a supply problem
- Call a licensed electrician or pool/spa technician to test voltage and the transformer → Shop the transformer at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the transformer.
Shop the transformer at RepairClinic or Amazon
Also tied to this fault: control board - Shop at RepairClinic or Amazon
Parts that commonly fix the BROWNOUT code
- transformer - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.