Pentair Pool heater UltraTemp HIGH WATER TEMP Error Code
What the HIGH WATER TEMP code means
On Pentair UltraTemp heat pump pool heaters, HIGH WATER TEMP means the water temperature is above 108F.
Likely causes
- pool/spa water genuinely above 108F
- failed water temperature thermistor reading high
- sensor wiring fault
How to fix it — step by step
- Check the actual water temperature with a separate thermometer
- If the water is truly that hot, turn the heat pump off and let it cool
- If the water is not hot, the sensor reading is wrong - do not keep running the unit
- Call a pool/spa technician to test the water thermistor → Shop the thermistor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the temperature sensor.
Shop the temperature sensor at RepairClinic or Amazon
Also tied to this fault: thermistor - Shop at RepairClinic or Amazon
Parts that commonly fix the HIGH WATER TEMP code
- temperature sensor - Shop at RepairClinic or Amazon
- thermistor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.