Pentair Pool heater UltraTemp LOW REFRIG Error Code
What the LOW REFRIG code means
On Pentair UltraTemp heat pump pool heaters, LOW REFRIG means the refrigerant low pressure switch is open.
Likely causes
- low refrigerant from a leak
- air and water temperatures too cold to operate
- bad refrigerant low pressure switch → Shop the refrigerant low pressure switch at RepairClinic
- faulty fan or TXV stuck closed
How to fix it — step by step
- Check if outside air is too cold for heat pump operation and wait for warmer weather if so
- Clear leaves and debris restricting airflow around the unit
- Make sure water flow is full and the fan runs
- Restart once after conditions improve
- If LOW REFRIG returns in mild weather, call a technician - do not add refrigerant yourself
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the low pressure switch.
Shop the low pressure switch at RepairClinic or Amazon
Also tied to this fault: refrigerant low pressure switch - Shop at RepairClinic or Amazon
Parts that commonly fix the LOW REFRIG code
- low pressure switch - Shop at RepairClinic or Amazon
- refrigerant low pressure switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.