Pentair Pool heater UltraTemp HIGH REFRIG Error Code
What the HIGH REFRIG code means
On Pentair UltraTemp heat pump pool heaters, HIGH REFRIG means the refrigerant high pressure switch is open.
Likely causes
- water circulation pump not on or insufficient water flow
- external bypass open
- bad refrigerant high pressure switch → Shop the refrigerant high pressure switch at RepairClinic
- TXV stuck closed
How to fix it — step by step
- Turn the heat pump off
- Restore full water flow - pump on, filter clean, valves open, external bypass closed
- Wait for pressures to settle, then restart once; Pentair notes a unit that sat unused may need cycling on and off up to three times
- If HIGH REFRIG returns, call a technician - refrigerant and TXV work is sealed-system work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the high pressure switch.
Shop the high pressure switch at RepairClinic or Amazon
Also tied to this fault: refrigerant high pressure switch - Shop at RepairClinic or Amazon
Parts that commonly fix the HIGH REFRIG code
- high pressure switch - Shop at RepairClinic or Amazon
- refrigerant high pressure switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.