Pentair Pool heater UltraTemp LOW AMBIENT TEMP Error Code
What the LOW AMBIENT TEMP code means
On Pentair UltraTemp heat pump pool heaters, LOW AMBIENT TEMP means the refrigerant temperature sensor indicates air temperature is too low for heat pump operation, or a defrost cycle did not complete within the allotted time; the manual says to wait until ice melts from the evaporator coil and/or air temperatures rise.
Likely causes
- air temperature too low for operation
- defrost cycle did not complete in time
- iced evaporator coil
- bad thermistor
How to fix it — step by step
- Turn the heat pump off and wait for ice to melt from the evaporator coil
- Wait for outside air temperatures to rise before restarting
- Clear debris around the unit so airflow is unrestricted when it restarts
- If the alarm appears in mild weather with no ice, call a technician about the thermistor → Shop the thermistor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the temperature sensor.
Shop the temperature sensor at RepairClinic or Amazon
Also tied to this fault: thermistor - Shop at RepairClinic or Amazon
Parts that commonly fix the LOW AMBIENT TEMP code
- temperature sensor - Shop at RepairClinic or Amazon
- thermistor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.