Pentair Pool heater UltraTemp LOW WATER FLOW Error Code

What the LOW WATER FLOW code means

On Pentair UltraTemp heat pump pool heaters, LOW WATER FLOW means the pressure switch sensing water flow is open - the heat pump is not seeing enough water flow.

Likely causes

  1. circulation pump off or low flow
  2. dirty filter or clogged baskets
  3. closed valves or open external bypass
  4. failed water pressure switch → Shop the water pressure switch at RepairClinic

How to fix it — step by step

  1. Make sure the circulation pump is running
  2. Clean or backwash the filter and empty all baskets
  3. Open valves to the heat pump fully and close any external bypass around it
  4. Restart the heat pump once flow is strong
  5. If the alarm persists with good flow, call a pool/spa technician

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the LOW WATER FLOW code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Pentair Pool heater UltraTemp error codes

See all Pentair UltraTemp codes & guides →