Pentair Pool heater UltraTemp FIVE ALARMS Error Code
What the FIVE ALARMS code means
On Pentair UltraTemp heat pump pool heaters, FIVE ALARMS indicates that 5 faults have occurred in one hour. It automatically resets in one hour or can be manually reset by pressing the ON/OFF button.
Likely causes
- five alarms of any kind within one hour
- an underlying repeating fault such as low flow or a refrigerant pressure alarm
How to fix it — step by step
- Press ON/OFF to clear the alarm, as the manual directs, or wait one hour for auto-reset
- Watch the display for the next underlying alarm - that code is the real fault
- Fix the simple cause first if it is flow-related: pump on, filter clean, valves open
- If alarms keep recurring, stop resetting and call a pool/spa technician with the underlying code
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the FIVE ALARMS code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.