Pentair Pool heater MasterTemp ERR PS Error Code
What the ERR PS code means
On Pentair MasterTemp (and Sta-Rite Max-E-Therm) gas pool heaters, ERR PS means the water pressure switch is open - no water flow through the heater. The manual says the error clears and normal operation resumes when water flow is established.
Likely causes
- circulation pump off or low flow
- dirty filter or closed valves
- clogged baskets
- failed water pressure switch → Shop the water pressure switch at RepairClinic
How to fix it — step by step
- Make sure the circulation pump is running
- Clean or backwash the filter and empty skimmer and pump baskets
- Open all valves to the heater fully
- Confirm strong flow - the code should clear by itself when flow returns
- If ERR PS persists with good flow, call a pool/spa technician about the pressure switch
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the water pressure switch.
Parts that commonly fix the ERR PS code
- water pressure switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.