Pentair Pool heater MasterTemp ERR HLS Error Code
What the ERR HLS code means
On Pentair MasterTemp gas pool heaters, ERR HLS means the high temperature limit switch is open - water temperature after the first pass through the heat exchanger is more than 135F. The error clears when temperature falls below 135F.
Likely causes
- low water flow through the heater
- dirty filter or restricted plumbing
- failed high limit switch → Shop the high limit switch at RepairClinic
- internal bypass fault
How to fix it — step by step
- Turn the heater off and let it cool
- Restore full flow - pump on, filter clean or backwashed, valves open
- Clear skimmer and pump baskets
- Restart once with strong flow
- If ERR HLS returns with good flow, call a pool/spa technician - do not bypass the high limit
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the high limit switch.
Shop the high limit switch at RepairClinic or Amazon
Also tied to this fault: temperature limit switch - Shop at RepairClinic or Amazon
Parts that commonly fix the ERR HLS code
- high limit switch - Shop at RepairClinic or Amazon
- temperature limit switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.