Pentair Pool heater MasterTemp ERR IGN Error Code
What the ERR IGN code means
On Pentair MasterTemp gas pool heaters, ERR IGN means the Ignition Control Module was not able to ignite the heater. Clear it by pressing the HEATER OFF button.
Likely causes
- gas supply off or low
- failed igniter → Shop the igniter at RepairClinic
- flame sensor fault
- ignition control module fault → Shop the ignition control module at RepairClinic
How to fix it — step by step
- Press HEATER OFF to clear the error and note the code; if you smell gas, stop and call your gas utility
- Check from outside the cabinet that the gas shutoff is open
- Make sure the pump is running with good flow
- Try one restart
- If ERR IGN returns, call a licensed pool/spa or gas technician - do not open the gas train
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the igniter.
Shop the igniter at RepairClinic or Amazon
Also tied to this fault: ignition control module - Shop at RepairClinic or Amazon; gas valve - Shop at RepairClinic or Amazon
Parts that commonly fix the ERR IGN code
- igniter - Shop at RepairClinic or Amazon
- ignition control module - Shop at RepairClinic or Amazon
- gas valve - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.